3
OPERATION
HIGH & LOW TURN WHEEL
ENGINE
OIL ENTRANCE
GUARD RING
THROTTLE
LEVER
ASSEMBLY
SAFE SWITCH
DECELERATION MACHINE
BLADE
BEFORE STARTING check the following:
Oil level in engine
Oil level in gearbox
Fuel level
Condition of air lter
Condition of fuel lines
Condition of trowel arms and blades
Condition of ring guards
Label descriptions
Handle height to suit operator
To prevent uncontrolled spinning of the trowel, the engine control module is designed to shut off the
engine under certain conditions. For example, if the operator loses his/her grip on the trowel, the
engine control module will sense that the machine is spinning and shut off the engine.
WARNING: Do not lift the trowel overhead with a oat pan attached, as the pan
could fall off and strike personnel working in the vicinity.
To Next Page
Loading...
General