1. Purpose of the device
Stark Reverse Fit devices are accessories of the Stark-KAH2500S and KAH3000S
bucket sweepers. The Reverse Fit device can also be retrofitted on the bucket
sweeper. The bucket lip plate of a bucket sweeper equipped with the Reverse Fit
device faces the machine which enables a better sweeping result when ploughing
ahead.
1.1Safety instructions
• The equipment may only be used by a person familiar with its operation. The
user has primary responsibility for the safe operation of the device
• Make sure that the base machine is compatible with the device
• Never operate a faulty device
• Before use, make sure that the device is properly connected to the base
machine and all the locks are fastened
• Switch off the tractor during maintenance. Engage the parking brake
• Never go under a device that is suspended by the raised front loader only.
Support the device
• When connecting the machine, consider the danger of crushing
• Don’t use the device for a purpose for which it was not designed
• During maintenance, use appropriate protective equipment
• Do not remove parts that belong to the device. Removal of components may
impair the safety of the device
• Understand the warning labels and signage
• When using the device on public roads, road traffic laws and regulations must
be complied with
• Please note the device width, weight and other factors that affect drivability.
Adjust the working speed according to conditions. Please also ensure that
there are no people in the area of work
• Before removing the hydraulic hoses the machine should be firmly on the
ground
• Use original spare parts only
To Next Page
Loading...
Need help?
General