12
Attach the wiping attachment Illustration
Remove the spray head from the spray bottle.
Attach the wiper attachment to the spray head.
Secure the wiper attachment and the spray head with the fixating ring.
Attach the wiper pad to the wiper attachment and secure with Velcro.
Attach the extension pole to the separator then tighten the nut. And adjust length of pole to match
your need.
Please notice:
It is important that keep the extension pole tightens with window cleaner, to prevent fall and hit
people.
Fill the spray bottle
Fill the concentrate (20 ml) into the spray bottle and fill the bottle slowly with clear water
(makes 250 ml of detergent solution).
Close the bottle.
Charge the battery
Insert the charger delivered with the appliance into a proper socket. Then insert the charging
cable plug to the back of the appliance.
Note: During the charging process, the charge/operating display blinks. Once the battery is fully
charged, it will be permanently illuminated.
Start working
To Next Page
Loading...
Need help?
General