Control switch LED and bike statuses
Guide
4
HOW TO ENGAGE
THE VARG
While the bike is in Neutral ◐ mode:
• Press the - button.
If successful, LED will be static green ●.
HOW TO DISENGAGE
THE VARG
While the bike is in Engaged ● mode:
• Press and hold the Power ●
button on the control switch
until LED lights up blue ●.
If successful, LED will be fast
flashing green ◐.
HOW TO HARD
SHUTDOWN THE VARG
While the bike is in Standby ◐ mode:
• Press and hold the + and - buttons
until the LED lights up white ●●.
If successful, LED will be completely Off.
1.3
1.4
1.5
To Next Page
Loading...