Stark VARG - Page 6

Control switch LED and bike statuses
Guide
6
While the bike is in Off mode:
1 Connect the charger cable to the
bike’s charging port.
2 Press and hold the Power ● button
until the LED lights up static blue ●.
If successful, LED will be static blue ●.
HOW TO CHARGE THE
VARG WITH ACTIVE
COOLING SYSTEM
While the bike is in Standby ◐, Neutral ◐ or
Engaged ● modes:
1 Connect the charger cable to the
bike’s charging port.
2 Press + until the LED lights up
static blue ●.
If successful, LED will be static blue ●.
While the bike is in Off mode:
1 Connect the charger cable to the
bike’s charging port.
2 Press and hold the Power ● button
until the LED lights up static blue ●.
3 Press + until the LED lights up
static blue ●.
If successful, LED will be static blue ●.
1.8