Pairing
Starkey
®
Hearing Technologies TV must be paired to interact with Livio
™
AI and Livio hearing aids. Pairing occurs once,
then the hearing aids and TV streamer will automatically recognize each other. The TV streamer can be paired within
Inspire
®
or outside of Inspire. Livio AI and Livio hearing aids can be paired with up to five TV streamers.
1
2
3
4
5
6
7
8
Launch Inspire, connect and detect hearing aids.
Select “Accessories” on the left navigation bar.
Ensure the TV streamer is powered on.
Place the hearing aids within 6 inches of the TV streamer.
Place the TV streamer in pairing mode with a short press
of the pairing button. The LED will rapidly blink blue.
Select “Pair” to put the hearing aids into pairing mode
A
.
Pairing is successful when the TV streamer image displays
in the accessory screen
B
.
Use the drop-down menu below the streaming accessories
box to set “Hearing Aid Mic While Streaming”
C
.
Select the information icon for pairing instructions if needed
D
.
Power off any mobile phone or other
accessories that were previously paired
with the hearing aids.
Ensure the TV streamer is powered on.
Open and close the battery doors
of the hearing aids.
Place the hearing aids within 6 inches
of the TV streamer.
Press the Bluetooth
®
button on the
TV streamer to place in pairing mode.
The LED will rapidly blink blue.
Once the LED blinks green for each
hearing aid, both hearing aids are paired.
The TV streamer will recognize if the fitting
is monaural or binaural and pair one or
two hearing aids accordingly.
1
4
5
6
2
3
Volume up
Power on/off
Pair
Volume down
A
B
C
D
Starkey Hearing
Technologies TV
3 5
Pairing within Inspire
Pairing outside of Inspire
To Next Page
Need help?
General