16
To return the tracker to normal operation and to
unlock the engine, send an SMS command 30 XXXX30 XXXX
(where xxxx is emergency disarm code) or a command
from the StarLine mobile application (you also need to
enter emergency disarm code).
If a wrong emergency disarm code is entered 3
times, then code entry shall be suspended for 15
min with corresponding SMS alert submitted to an
owner phone.
After exit from Anti-hijack mode device switches
to Disarmed mode and remains in it until tag is
detected and then lost in operating range.
Also an engine can be remotely blocked with
SMS command
3131 while vehicle is on parking, for
example, when tag loss alert received or vehicle is
grabbed along with a tag.
Service (Valet) Mode
Service mode is used for temporary security
features deactivation and inhibiting new tags/
registration, i.e. while vehicle maintenace or wash.
Service mode is activated with one of the
following methods:
1) push and hold a tag button within 3 sec until LED
lights up yellow
2) SMS text command
5151
To Next Page
Loading...
