EasyManua.ls Logo

Starline ROLDECK Series User Manual

Default Icon
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RDBU.MM.00
INSTRUCTION MANUAL ABOVE GROUND ROLDECK
GB
D
MONTAGEANLEITUNG ROLDECK OBER FLUR
NL
MONTAGEHANDLEIDING ROLDECK OPBOUW
STARLINE ROLDECK
Question and Answer IconNeed help?

Do you have a question about the Starline ROLDECK Series and is the answer not in the manual?

Starline ROLDECK Series Specifications

General IconGeneral
CategoryLighting Equipment
Voltage24V DC
CRI>80
Color Temperature3000K, 4000K
Beam Angle120°
CoolingPassive

Summary

Starline Roldeck Manual Cover and Introduction

Key Safety Measures and Warnings

Assembly Preparations and Situation Identification

List of Roldeck Components

In-Roller Motor Components (Situation 1)

List of parts for the Roldeck with an in-roller motor, including housings and endcaps.

Roller Components (Situations 2 & 3)

List of parts for the Roldeck with external motors, including bearings and driving spindles.

List of External Motor Components

External Motor Components (Situation 2)

Parts list for the Roldeck with an external motor, including brackets and motors.

External Motor Components (Situation 3)

Parts list for the Roldeck with an external motor, including brackets and motors.

Assembling Roller - Situation 1

Assembling Roller - Situation 2/3

Assembling Above Ground Roldeck

Steps 03-04: Positioning Supports and Attaching Cover

Positioning support structures and checking alignment with a tape measure.

Assembling Above Ground Roldeck (Continued)

Steps 05-06: Securing Components and Wall Mounting

Securing components using a drill and specific fasteners like M8x65.

Assembling Above Ground Roldeck (Final Step)

Assembling External Motor - Situation 2

Assembling External Motor - Situation 2 (Continued)

Step 11: Connecting Motor (Situation 2)

Connecting the motor with M8 fasteners and the correct bracket.

Assembling External Motor - Situation 3

Steps 09-10: Attaching Bracket and Mounting Motor

Attaching the motor bracket and components using M10x25 and M10 fasteners.

Assembling External Motor - Situation 3 (Continued)

Step 11: Connecting Motor (Situation 3)

Connecting the motor with M8 fasteners and the correct bracket.

Related product manuals