support.starlink.com
GEN 3 ROUTER SETUP GUIDE (STANDARD GEN 1 KITS)
6. On your device, find and connect to the STARLINK network in your WiFi settings.
7. You are now connected! The light on the Gen 3 Router should be solid white, and you can use the Starlink App
to customize additional settings, check your connection, and more.
5. Plug the provided Gen 3 Router Ethernet Cable into port 1 on the Gen 3 Router and the white port on the Gen 1 Power Supply.
Connectors should sit flush with the back of the Gen 3 Router. The light on your power supply may not turn on, check the light on
the front of your Gen 3 Router to verify connectivity.
White Line | Connected Yellow Line | Poor Signal Red Line | Disconnected
To Next Page
Loading...
