1 Start by making sure your Starlink is set up and connected to the internet prior to setting up your Gen 3 Router.
Connect to your existing Starlink WiFi network from your device.
Setup
2. For best performance, choose a location for your Gen 3 Router that is in the line of sight of your Gen 2 Router.
We recommend putting both routers in the same room.
Gen 3 Router
Ethernet Cable
Gen 3 Router
Power Cable
Power
Supply
Starlink
Plug
RJ45
Cover
Gen 3 Router
1.5 m
(4.92 ft)
1.5 m
(4.92 ft)
3. Unbox your Gen 3 Router Kit.
support.starlink.com
GEN 3 ROUTER SETUP GUIDE (STANDARD GEN 2 KITS)
To Next Page
Loading...