INSTALL
4 | Connect to Network
Insert the power cable to the back of the router and plug the
power supply into a power outlet. An LED will turn on signifying
the unit is powered on.
The Starlink Router Mini can be meshed to your current Starlink
system (excluding the Gen 1 Router) either wired or wirelessly.
For a wired connection to a Starlink Mini Kit, use 15m Mini
Starlink Ethernet Cable. If connecting to another Starlink router,
use a RJ45 Cat5e or greater. For a wireless connection, power on
your router and follow prompts in the app.
More information on wire and wireless meshing later in
document.
3 | Select Install Method
Choose your preferred installation method, either on a table or
wall and install the stand.
More information on stand installation later in document.
starlink.com/support
To Next Page
Loading...
