CONNECT TO NETWORK
WIRELESS MESH GUIDE
1. Ensure your Starlink Kit is set up and connected to the internet prior to adding your mesh nodes.
2. Find suitable install locations for your mesh nodes and plug them into power outlets.
3. Open the Starlink App.
4. Wait 1-2 minutes for a "New Mesh Node(s)" notification to appear in the app.
5. If a notification does not appear in the app, try positioning your router closer to your main router.
6. Tap "Pair" or "Pair All". The node(s) will begin connecting on the "Network" screen. Connection will take about 1-5 minutes.
7. Repeat with additional mesh nodes.
starlink.com/support
To Next Page
Loading...
