EasyManua.ls Logo

Starmobile Play - Page 12

Default Icon
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Starmobile PLAY
12
1. Make sure the unit is turned off.
2. Plug one end of the charger into the USB/charging port
then plug the other end into a standard AC power outlet.
3. Once connected, the battery icon will repeatedly flash
on the screen.
4. If the device has been depleted of battery life, it will
take a while before a charging indicator appears on
screen after it has been plugged to a power source.
5. When the battery level icon has stopped flashing, this
means that charging is complete. Disconnect the charger
from both the electrical outlet and the device.
ATTENTION
*Charging must be performed in well-ventilated areas
with temperatures ranging between -10 degrees Celsius
and +45 degrees Celsius.
*It is normal for the device and charger to become warm
during charging.
*Use only the supplied Starmobile charger
*Using accessories of other manufacturers or vendors
may invalidate any approval or warranty applicable to the
device. It may result in non-operation of the device or loss
of information.
*If the device shuts down automatically or indicates
“Battery is Low”, charge the battery.
*If the battery has not been entirely used up before
recharging, the charging time may decrease.