25
3811A Data Output Software Installation:
Insert CD into drive on your computer
Window will pop up
Run AutoRun.exe
Follow prompts to load program, make sure your
designation drive is set to C:
Once completed a “Datapro for Hardness icon will
appear on desktop
Launch the program using the Datapro for Hardness
icon on desktop shortcut
Using the USB cable provided insert round end to
the hardness tester and USB side to your computer
On the software screen select “Connect”. It will ask
for which COM port you are attached to. Select COM
port.
Once connected you can view all saved memory files
on screen.
There are also selections for “Database” and
“Reports”.
TECHNICAL SUPPORT: (201) 962-8352
To Previous Page
Loading...
