EasyManua.ls Logo

starsat SR-98USB User Manual

starsat SR-98USB
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SAFETY PRECAUTION
CAUTION:
The lightening flash with
arrowhead symbol, within an
equilateral triangle, is intended
to alert the user to "dangerous
voltage" and to prevent from a
risk of electric shock.
Warning:
To reduce the risk of electric
shock, don't open the cabinet.
Refer servicing to qualified
personnel only.
The exclamation point within an
equilateral triangle is intended to
alert the user to important
operating and maintenance
(servicing).
WARNING: The apparatus shall not be exposed to d
ripping or splashing and that no objects filled
with liquids, such as vases, shall not be placed on the apparatus.
WARNING:
Do not put the candle or lamp stand on the cabinet; otherwise, there is the danger of
fire.
WARNING: The unit should be connec
ted to a power supply only of the type descry bed in the
operating instructions or as marked on the unit. If you are not sure of the type of power supply
(for
example: 120 or 230V) to your home, consult your local dealer or local power company.
WARNING:
Do not open the cabinet or touch any parts in the inner mechanism. Consult your local
dealer for technical service if the opening is required.
WARNING:
The mains plug is used as the disconnect device, the disconnect device shall remain
readily operable.
WARNING:
The battery of remote control should not be exposed excessive heat such as sunshine,
fire or the like.
WARNING: Maintenance man must use the appointed screw in the rear plate.
Note: Do not open the cabinet to avoid the unit direct exposure to radiation.
Unit Cleaning:
control with a soft cloth lightly moistened with a mild detergent solution.
Attachments: Never add any attachments and/or equipment without t
he manufacturer consent; as
such additions may result in the risk of fire, electric shock or other personal injury.

Questions and Answers:

starsat SR-98USB Specifications

Video IconVideo
video bit rateMax 15Mbps
aspect ratio4:3, 16:9, Auto
active pixel resolution720x480 @ 30fps; 720x576 @ 25fps
Audio IconAudio
audio bit rateMax 384Kbps
Input Signal IconInput Signal
input frequency range950MHz ~ 2150MHz
input level range-65dBm ~ -25dBm
channel bandwidth36MHz
LNB Control IconLNB Control
LNB power supply13/18V (500mA max)
polarized control voltage13/18V
DiSEqC control versionDiSEqC1.0, DiSEqC1.1 and DiSEqC1.2
RF Modulator IconRF Modulator
input connectorIEC 169-24 Male x 1
output connectorIEC 169-24 Female x 1
output channel range21~69(PAL), 14~83(NTSC)
Miscellaneous IconMiscellaneous
supply voltage100~240VAC~50~60Hz
power consumptionMax. 25 watts
operation temperature range+5° to +40°

Summary

Safety Precautions

CAUTION Symbols

Describes lightning flash, electric shock, and exclamation point warning symbols.

General Operational Warnings

Warns against liquids, fire hazards, incorrect power supply, and touching internals.

Remote Control & Panel Description

Remote Control Functions

Lists and describes buttons on the remote control.

Basic Operations

Initial Setup & Power Management

Covers switching on, standby mode, and initial setup.

Menu Operations

Menu Navigation & Initial Setup

Overview of menu structure, language selection, password.

Antenna Settings Configuration

Details on setting up the antenna.

Automatic Satellite Search

Performing automatic channel scans.

Manual TP Search Procedure

Manually searching for transponders.

Software & Channel Data Transfer

Details on transferring SW, Channels, SW+Channels.

OTA Software Upgrade Process

Performing Over-The-Air upgrades.

Factory Default Reset Procedure

Resetting the device to factory defaults.

Editing Channels (Delete, Move, Rename)

Deleting, moving, renaming channels.

Output Settings Configuration

Configuring video and audio output.

Parental Lock Setup & Mode

Configuring parental controls and ratings.

Channel Recording Reservation System

Scheduling channel recordings.

PVR Recording Settings Configuration

Configuring PVR recording parameters.

Troubleshooting Guide

Front Panel Display Issues

Resolving problems with the front panel display.

Audio/Video Output Problems

Troubleshooting no picture or sound.

Signal Reception Issues

Diagnosing and fixing signal loss or bad signal.