EasyManua.ls Logo

starsat SR-x1010hd - User Manual

starsat SR-x1010hd
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SAFETY PRECAUTION
CAUTION:
The lightening flash with
arrowhead symbol, within an
equilateral triangle, is intended
to alert the user to "dangerous
voltage" and to prevent from a
risk of electric shock.
Warning:
To reduce the risk of electric
shock, don't open the cabinet.
Refer servicing to qualified
personnel only.
The exclamation point within an
equilateral triangle is intended to
alert the user to important
operating and maintenance
(servicing).
WARNING: The apparatus shall not be exposed to d
ripping or splashing and that no objects filled
with liquids, such as vases, shall not be placed on the apparatus.
WARNING: Do not place naked flame sources, such as lighted candles on the apparatus
;
otherwise, there is the danger of fire.
WARNING: T
he unit should be connected to a power supply only of the type descry bed in the
operating instructions or as marked on the unit. If you are not sure of the type of power supply (for
example: 120 or 230V) to your home, consult your local dealer or local power company.
WARNING:
Do not open the cabinet or touch any parts in the inner mechanism. Consult your local
dealer for technical service if the opening is required.
WARNING: The mains plug is used as the disconnect device, the disconnect device shall
remain
readily operable.
WARNING:
control should not be exposed excessive heat such as sunshine, fire or the like.
WARNING: Maintenance man must use the appointed screw in the rear plate.
WARNING: Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
WARNING:
Ensure that the ventilation is not impeded by covering the ventilation openings with
items such as newspapers, table-cloths, curtains, etc.
WARNING: Use the apparatus only in moderate climates (not in tropical climates).
Note: Do not open the cabinet to avoid the unit direct exposure to radiation.

Questions and Answers

  • J
    Jay SmithAug 1, 2025
    Why is there no picture or sound on my starsat SR-x1010hd TV Receiver?
    • T
      Teresa BushAug 1, 2025
      There could be several reasons why you're not getting any picture or sound: * The audio/video output of the receiver might be incorrectly connected to your TV. Ensure the audio/video output is correctly connected. * The satellite antenna might be incorrectly connected. Make sure the antenna cable is properly connected. * A 'No or bad signal' message might appear. In this case, check any other devices connected between the antenna and the receiver, or try adjusting the antenna position. * The audio might be muted. Press the MUTE button to unmute. * The TV might be off. Turn the TV on.
  • A
    Amber JohnsonAug 5, 2025
    What to do if my Starsat TV Receiver remote controller does not operate?
    • K
      Kimberly TranAug 6, 2025
      If your Starsat TV Receiver remote controller isn't working, it's likely due to the batteries. Check if the batteries are inserted correctly, and if they are, try replacing them with new ones.
  • A
    Amanda RomeroAug 11, 2025
    What to do if my Starsat TV Receiver shows no picture?
    • T
      teresatannerAug 11, 2025
      If your Starsat TV Receiver is showing no picture, it could be due to a few reasons: * The receiver may not be receiving a signal. Check the antenna cable, replace it if necessary, or ensure it's tightly connected to the receiver. * Some tuner parameters might be set incorrectly. You should set the values of tuner parameters correctly. Please refer to the installation menu.
  • C
    Caleb JacksonAug 16, 2025
    Why does my Starsat TV Receiver have poor picture quality?
    • N
      nicholasgonzalezAug 16, 2025
      Poor picture quality on your Starsat TV Receiver could be due to signal loss in the cable. To resolve this, try changing the antenna power in the antenna menu.
  • R
    Rebecca TaylorAug 21, 2025
    What to do if my Starsat TV Receiver showing no or bad signal?
    • J
      Julian JohnsonAug 21, 2025
      If your Starsat TV Receiver is showing 'No or bad signal', it could be due to a few reasons: * The UHF antenna may not be pointing correctly. Adjust the antenna. * The signal might be too strong. Connect a signal attenuator to the signal input. * The antenna might be too small. Change to a larger antenna.
  • A
    aaron43Aug 27, 2025
    How to fix a starsat SR-x1010hd TV Receiver when the front panel doesn’t display any message?
    • R
      Renee HendersonAug 27, 2025
      If the front panel of your Starsat TV Receiver isn't displaying any message, the power cord may not be plugged in. Check that the power cable is properly plugged into the wall outlet.

Summary

Safety Precautions

Electrical Safety Symbols and Warnings

Explanation of warning symbols and general safety advice.

Usage and Maintenance Guidelines

Cleaning, Placement, and Protection

Guidance on unit cleaning, location, and power cord protection.

Parts Replacement and Safety Checks

Procedures for replacing parts and conducting safety checks.

Remote Control and Panel Description

Front Panel Overview

Details and functions of the front panel controls and indicators.

Rear Panel Connections

Explains the various input and output ports on the rear panel.

Remote Control Functions

Description of buttons and their functions on the remote control.

Basic Operations: Power and Mode

Switching On and Standby Mode

How to power the receiver on, enter standby, and switch off.

Mute and TV;Radio Switching

Functions for muting audio and changing between TV and Radio modes.

Basic Operations: Display and Audio

Display Modes and Audio Settings

Adjusting display format, video output, audio tracks, and subtitles.

Basic Operations: Playback Features

Pause, Zoom, and Sleep Timer

Functions for pausing, zooming, and setting the sleep timer.

Basic Operations: Channel Management

Satellite and Favorite Channel Selection

Selecting satellites and managing favorite channel groups.

EPG, Channel Locking, and Information

Accessing EPG, locking channels, and viewing channel information.

Basic Operations: Navigation and Editing

Channel Navigation and List Management

Using navigation keys (CH, Vol, OK) and managing channel lists.

Menu Navigation and Input Keys

Using MENU, EXIT, HOME, DEL, CAP for navigation and input.

Basic Operations: Media and Utilities

USB Media Access and Playback

Accessing USB, MP3, JPEG, Movie files, and PVR LIST.

Calendar and Time Shift Functions

Using Calendar, A-B repeat, and Time Shift (T.S.) features.

Basic Operations: Recording Control

Recording and Playback Control

Functions for stopping recording and controlling playback.

Basic Operations: Advanced Playback

Playback Speed and Marking

Controlling playback speed and marking points for playback.

Favorite Group Navigation

Navigating and selecting channels within favorite groups.

Basic Operations: System Alerts

LNB Short Circuit Warning

Understanding and resolving LNB short circuit notifications.

Menu Operations

Easy Installation Guide

Step-by-step process for initial setup and satellite scanning.

Satellite Installation Settings

Configuring antenna, positioner, transponders, and scanning modes.

System Settings and Configuration

Adjusting language, audio, display, parental controls, and time.

Software Upgrade and Backup

Updating firmware via USB, STB-STB, or OTA, and backing up data.

Troubleshooting Common Issues

No Display or Sound Problems

Solutions for issues like no message, no picture, or no sound.

Signal and Remote Control Issues

Addressing problems with weak signals, poor picture quality, and remote controller.

Technical Specifications

Video and Audio Decoding Details

Details on supported video and audio formats and bit rates.

Input Signal and LNB Control Specs

Specifications for signal frequency, level, and LNB control.

Miscellaneous Hardware Information

Information on supply voltage, power consumption, and dimensions.

starsat SR-x1010hd Specifications

Video Specifications IconVideo Specifications
bit rate15 Mbps
aspect ratio4:3, 16:9, Auto
active pixel resolution (SD)720x480 @ 30fps; 720x576 @ 25fps
active pixel resolution (HD)480p, 576p, 720i, 720p, 1080i
Audio Specifications IconAudio Specifications
bit rate384 Kbps
decodingMPEG-4/MPEG-2/MPEG-1 layer I & II
modeMono, Dual, Stereo, Joint stereo
Demodulator Specifications IconDemodulator Specifications
demodulationQPSK & 8PSK
symbol rateSCPC/MCPC
energy dispersionDVB-S/S2 recommendation
Input Signal IconInput Signal
frequency950MHz ~ 2150MHz
input level-65dBm ~ -25dBm
channel bandwidth36MHz
LNB Control IconLNB Control
power supply13/18V (500mA max) with short circuit protection
polarized control13/18V polarization (vertical/horizontal)
DiSEqC controlDiSEqC1.0, DiSEqC1.1 and DiSEqC1.2
Miscellaneous IconMiscellaneous
supply voltage100~240VAC~50/60Hz
power consumptionMax. 25 watts
operation temperature+5° to +40°
storage temperature-20° to +70°
dimension310 * 260 * 65 mm
weight1.85 Kg