starsat SR-X6300USB User Manual

SAFETY PRECAUTION
CAUTION:
The lightening flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user
to "dangerous voltage"
and to prevent from a risk
of electric shock.
Warning:
To reduce the risk of
electric shock, don't open
the cabinet. Refer
servicing to qualified
personnel only.
The exclamation point
within an equilateral
triangle is intended to
alert the user to important
operating and
maintenance (servicing).
WARNING: The apparatus shall not be exposed t
o dripping or splashing and
that no objects filled with liquids, such as vases,
shall not be placed on the
apparatus.
WARNING:
Do not put the candle or lamp stand on the cabinet; otherwise, there
is the danger of fire.
WARNING: The unit should be con
nected to a power supply only of the type
descry bed in the operating instructions or as marked on the unit. If you are not
sure of the type of power supply
(for example: 120 or 230V) to your home,
consult your local dealer or local power company.
WARNING:
Do not open the cabinet or touch any parts in the inner mechanism.
Consult your local dealer for technical service if the opening is required.
WARNING:
The mains plug is used as the disconnect device, the disconnect
device shall remain readily operable.
WARNING:
The battery of remote control should not be exposed excessive
heat such as sunshine, fire or the like.
WARNING: Maintenance man must use the appointed screw in the rear plate.
Note: Do not open the cabinet to avoid the unit direct exposure to radiation.
Unit Cleaning:
After the unit power is turned off, you can clean the cabinet,
panel and remote control with a soft cloth lightly moistened with a mild detergent
solution.

starsat SR-X6300USB Specifications

General

Brand	starsat
Model	SR-X6300USB
Category	Receiver
Language	English

Summary

Safety Precautions

General Safety Warnings and Notes

Covers warnings about liquid exposure, fire hazards, power connection, internal access, disconnect device, battery, and radiation.

Operational Safety Guidelines

Covers attachments, locating, power cord protection, object/liquid entry, parts replacement, and safety checks.

Remote Control & Panel Description

Front Panel Description

Details the functions of the POWER button, Display, Remote Sensor, VOL+/-, MENU, OK, and CH+/- buttons on the front panel.

Rear Panel Description

Describes the various input and output ports on the rear panel, including IF IN/OUT, RS-232, TV SCART, VIDEO, AUDIO, ANT IN, TO TV, AC IN, and POWER ON/OFF.

Remote Control Description

Provides a visual guide and labels for the buttons on the remote control unit.

Basic Operations

Switch on STB

Instructions for switching on the STB and initial quick setup, including troubleshooting for no signal.

Installation

Single Search

How to scan for satellites and channels using the Single Search function.

LNB and DiSEqC Configuration

Settings for 22K, DiSEqC1.0/1.1, Positioner, Polarity, Toneburst, and 4Port configurations.

Channel Scan Options

Covers TP Index, FTA Only, Scan Channel, Scan Mode, and starting the search process.

Multi and TP Scan

Explains how to perform Multi Search and TP Scan for channels and transponders.

Satellite and TP List Management

Covers managing the Satellite List and TP List, including editing and deleting entries.

Transponder and Antenna Setup

Details TP Index management, adding/deleting TPs, and LNB configuration within Antenna Setup.

Satellite Guide and Unicable Configuration

Explains satellite guidance calculation and Unicable LNB setup.

Channel

TV Channel List

How to navigate, preview, and switch satellites within the TV Channel List.

Channel List Editing

Covers moving, swapping, and sorting channels within the TV channel list.

Channel List Editing and Deletion

Channel Management Features

Covers skipping, locking channels, editing existing channels, and creating new channels.

Channel Setup and Search

Tools

Factory Default and Software Upgrade

Resets settings to default and provides options for software updates.

Receiver Software Updates

Covers STB-STB, Backup to USB, and OTA software upgrade methods.