Need help?Do you have a question about the Start italiana XMT-SI-485 and is the answer not in the manual?
General| Brand | Start italiana |
|---|---|
| Model | XMT-SI-485 |
| Category | Measuring Instruments |
| Language | English |
Before installation and use, carefully read instructions. Manufacturer not responsible for operations not mentioned. Refer to authorized personnel for maintenance.
Illustrates the wiring for M12-4 pins male and 7/8-4 pins male connectors for RS485 and supply.
Details DIP-SWITCH settings for XMT-SI-RF probe to select different operation modes and their impact on battery life.
Explains DIP-SWITCH settings for XMT-SI-485 to set the memory address for the probe.
Defines transmission parameters (speed, parity, data bits, stop bits, flow control) for XMT-SI-485, -LOG, and TTL probes.
Details commands for reading and deleting data logger information, including reply formats and checksum calculation.
Details post-installation operations, including connecting the battery and clearing initial data for proper logger function.
Illustrates the application of START Italiana probes in a typical service station environment.
Shows the application of START Italiana probes in depot storage facilities, highlighting different tank configurations.
To Next Page
