StarTech.com LTULOCK4D User Manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: December 30, 2019 4:34 PM
Product Diagram (LTULOCK4D)
Components Function
1 Security Cable
• Used to secure a Device to a secure stationary
object.
2 Bumper Spacers
• Prevents the Lock from scratching the
connected Device.
3 Locking Hook • Used to connect the Lock to a Lock Slot.
4 Adapter
• Used to change the Lock head to
accommodate dierent lock slots.
• Standard Slot = 3x7 mm slot
• Wedge Slot = 3.2x4.5 mm slot
• Nano Slot = 2.5x6 mm slot
5 Adapter Slot • Used to house the Adapter.
6 Guide Line
• Used to enter a combination on the Dials.
• Align the combination digits with the Guide
Line.
Universal 4-Digit Combination Laptop Lock | Pivot and Rotate Hinge
7
Release Button
• Used to release the Lock from the Lock Slot.
8 Dials • Used to enter the Lock’s combination.
9 Reset Screw
• Used to set a new combination.
Note: Once the combination is changed, if you
lose the new combination you will not be able to
reset the combination.
Requirements
For the latest requirements, please visit www.startech.com/LTULOCK4D.
• Default Combination = 0-0-0-0
Setting a New Combination
1. Align the numbers on the Dial with the Guide Line using the default combination
0-0-0-0.
2. Insert a Flathead Screwdriver (sold separately) into the Reset Screw and push the
Reset Screw in toward the Lock.
3. With the Reset Screw pushed in, turn the Reset Screw clockwise 90 degrees.
4. Rotate each of the Dials to the desired number.
5. Insert the Flathead Screwdriver into the Reset Screw and turn the Reset Screw
counter-clockwise 90 degrees, moving the Reset Screw back to its original position.
The Reset Screw will pop back out when it is in the original position.
Note: Be sure to write down the new combination and keep it in a secure location
away from the lock.
6. To set a new combination follow steps 1 - 5 using the new combination set up in
Step 4 instead of the default combination.
Installing a Lock Adapter
1. Select the Adapter that ts the Lock Slot on the Device you are trying to secure.
2. While pressing the Release button, insert the Adapter into the Adapter Slot on the
Lock, making sure that the Lock Adapter is pushed all the way into the Adapter
Slot and ush with the Lock.
3 4
5
1
2
7
8
6
9

StarTech.com LTULOCK4D Specifications

General

Master (outer) case width	240 mm
Master (outer) case height	260 mm
Master (outer) case length	510 mm
Harmonized System (HS) code	83014090
Quantity per master (outer) case	50 pc(s)
Best uses	Universal
Lock type	Combination lock
Product color	Black, Silver
Cable lock slot type	Kensington
Number of combinations	10000
Manual	Yes
Package depth	220 mm
Package width	128 mm
Package height	50 mm
Package weight	160 g
Sustainability certificates	RoHS, CE

Weight and Dimensions

Width	49.6 mm
Height	16 mm
Weight	155 g
Cable length	2 m