Component Function
01 Casters x 4
• Roll a Rack or Enclosure from location to
location.
• Maximum Weight Capacity stationary = 250 kg
rolling = 75 kg.
02 Mounting Holes x 4
• Securely mount the Casters to a Rack or
Enclosure.
Package Contents
• Casters x 4
• M6 Screws x 16 + (*2)
• Washers x 16 + (*2)
• M6 Nuts x 16 + (*2) (* Spare Parts)
Requirements
For the latest requirements, please visit www.startech.com/RKCASTER2
• 10 mm Wrench x 2
• Rack or Enclosure w/ Caster Holes
Installing the Casters
Racks or Enclosures with Caster Mounting Holes
Note: The Rack or Enclosure must feature four sets of four Caster Mounting Holes.
1. Ensure the Rack or Enclosure is positioned on it side.
Note: Two people are required for repositioning the Rack or Enclosure.
2. Align the Mounting Holes on the Casters with the Caster Mounting Holes on the bottom of the Rack or Enclosure.
3. Insert the M6 Screws (x 4) through the Flat Washers (x 4).
4. Insert the four M6 Screw and Flat Washer Combinations through the Caster Mounting Holes, the Rack or Enclosure, and into the M6
Nut.
To Next Page
Loading...