5. While securing the M6 Nut in place with a 10 mm Wrench, use a second 10 mm Wrench to tighten the M6 Screw.
6. Repeat step 5 to secure the other three M6 Screws.
Note: If the Rack or Enclosure has Leveling Feet, adjust the Leveling Feet after the Casters have been installed. Ensure the Rack or
Enclosure is level. Please refer to the Rack or Enclosure’s user manual for instructions on how to adjust the Leveling Feet.
7. Repeat steps 2-6 to install the three remaining Casters.
Product Dimensions
Warning Statements
To Next Page
Loading...