StarTech.com SATDOCK22U3S User Manual

Instruction Manual
1
Introduction
The SATDOCK22U3S USB 3.0 to SATA Dual Hard Drive Docking Station enables two
SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected
simultaneously to a computer through USB.
Using a single USB connection, this docking station can provide data transfer rates of
up to 5 Gbps with SuperSpeed USB 3.0, while remaining backward compatible with
USB 2.0 systems (data transfer rates up to 480 Mbps).
Extend the value of this hard drive docking station further with the addition of our
SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or
3.5in. IDE hard drive into a SATA hard drive dock.
Packaging Contents
• 1 x SATA Hard Drive Dock
• 1 x USB 3.0 Cable
• 1 x Power Adapter
• 1 x Instruction Manual
System Requirements
• USB enabled computer system with available USB port
• Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7 (32/64-bit), or
Apple® Mac OS® X, or Linux®
*If used with the Apple Mac OS operating system, this device will function in USB 2.0 mode only as USB
3.0 is not currently supported by Apple.

StarTech.com SATDOCK22U3S Specifications

General

Brand	StarTech.com
Model	SATDOCK22U3S
Category	Docking Station
Language	English