Do you have a question about the StarTech.com SATDOCK2REU3 and is the answer not in the manual?
SSD support | Yes |
---|---|
Storage media type | HDD, SSD |
Storage drive interface | Serial ATA, Serial ATA II, Serial ATA III |
Maximum storage capacity | 4 TB |
Storage drive sizes supported | 2.5, 3.5 \ |
Number of storage drives supported | 2 |
Chipset | Prolific - PL2775 |
Certification | REACH, CE, FCC |
Product color | Black |
LED indicators | HDD, Link, Power |
Maximum data transfer rate | 5 Gbit/s |
USB 3.2 Gen 1 (3.1 Gen 1) ports quantity | 1 |
Input current | 1.2 A |
Output current | 4 A |
Output voltage | 12 V |
Power plug type | Type M |
AC input voltage | 110-240 V |
Package depth | 195 mm |
Package width | 165 mm |
Package height | 130 mm |
Package weight | 885 g |
Cables included | AC, USB |
Storage temperature (T-T) | -10 - 95 °C |
Operating temperature (T-T) | 0 - 85 °C |
Operating relative humidity (H-H) | 5 - 90 % |
Windows operating systems supported | Windows 7 Home Basic, Windows 8, Windows XP Home |
Interface | USB 3.2 Gen 1 (3.1 Gen 1) |
Product type | HDD/SSD duplicator |
Transfer rate | 11 GB/min |
Number of fans | 0 fan(s) |
USB connector type | USB Type-B |
Duplicator operating modes | Copy, Erase |
Sustainability certificates | RoHS |
Number of simultaneous copies | 1 copies |
Master (outer) case width | 353 mm |
Master (outer) case height | 295 mm |
Master (outer) case length | 410 mm |
Quantity per master (outer) case | 8 pc(s) |
Depth | 128 mm |
---|---|
Width | 103 mm |
Height | 62 mm |
Weight | 562 g |
Dimensions (WxDxH) | 103 x 128 x 62 mm |
Step-by-step instructions for connecting the dock to a computer.
Guide for inserting SATA HDDs or SSDs into the dock slots.
Instructions on initializing new or unformatted drives in Windows.
Detailed steps to clone the contents of one drive to another.
Instructions for securely erasing data from connected drives.