STARTEK FM220 User Manual

Use of Biometric Device - STARTEK FM220
Note: All Browsers should be up to date.
Install RD Services:
Step 1: Open the below link and click on Registered Device.
http://acpl.in.net
Step 2: Download
a. Windows Certified RD Service
b. Windows Support Tools
Step 3: Install both the downloaded setup

STARTEK FM220 Specifications

General

Sensor Type	Optical
Resolution	500 DPI
Interface	USB 2.0
Compatibility	Windows, Linux
Operating Temperature	0°C to 50°C
Image Format	BMP, WSQ
Storage Temperature	-20°C to 60°C
Humidity	20% to 90% RH, non-condensing

Summary

Install RD Services

Step 1: Access Link and Register Device

Open the provided link and navigate to the 'Registered Device' section.

Step 2: Download RD Service and Support Tools

Download the Windows Certified RD Service and Windows Support Tools.

Step 3: Install Downloaded Setups

Install the downloaded RD Service and Support Tools setup files.

Device Testing and Usage

Test Capture Procedure

Perform a test capture after installation using the APCL icon.

Device Ready for Use

Confirm the device is ready for use on the tribal website.

Install Device Driver

Step 1: Access Driver Download Link

Navigate to the specified URL to locate driver software.

Step 2: Download FM220U Driver

Download the driver package for the FM220U device.

Step 3: Update Driver in Device Manager

Locate FM-220 in Device Manager and select 'Update Driver'.

Step 4: Browse for Driver Software

Choose the option to manually browse the computer for driver files.

Browser Configuration

Chrome Settings for Localhost

Enable 'Allow invalid certificates for resources loaded from localhost' in Chrome flags.

Firefox Certificate Exception

Add an exception for https://localhost:11200 in Firefox settings.