150 ( 150 baud )
300 ( 300 baud )
600 ( 600 baud )
1200 ( 1200 baud )
2400 ( 2400 baud )
4800 ( 4800 baud )
9600 ( 9600 baud )
Default setting: 9600
4.2.4.3.2 dEviCE ( Network device number )
It is possible to multidrop up to 99 instruments on one network. The device number
allocates a unique device reference for each individual unit. Note that without suitable
buffering, there is is a hardware limit of 30 instruments.
Default setting: 1
4.2.4.3.3 tyPE ( mode of Comms operation )
There are two modes of Comms operation possible. If the unit is to be operated
within a network, or a host computer accesses selective data then Slave mode is used.
The other mode, simply outputs a complete ASCII status report, consisting of the
process variable and the state of any alarms or output options. It is possible to dump
this data to a dumb terminal or to a printer.
The options are:
SLAVE ( Slave mode )
ASC OP ( Ascii output report mode )
SYSTEM MENU
Page 63
To Next Page
Loading...