To Next PageTo Next Page
Need help?Do you have a question about the STAX SRS-3100 and is the answer not in the manual?
Details connecting various audio sources to the driver unit using supplied cables.
Explains the function of the PARALLEL OUT terminal and provides important usage notes.
Identifies and describes the controls and connectors on the front of the unit.
Identifies and describes the input/output terminals and power connector on the rear.
Illustrates direct connection methods from various audio source devices.
Explains how to integrate the unit into an existing audio system.
Guides on adjusting volume when connecting via a headphone jack.
Lists checks for when no sound is produced, covering connections and power.
Provides guidance on what to do if the sound is distorted, primarily volume adjustment.
Offers solutions for hum noise, such as checking proximity to interference sources.
Explains potential temporary channel level differences during volume changes.
General| Type | Electrostatic |
|---|---|
| Cable Length | 2.5m |
| Connector | 5-pin PRO bias |
| Impedance | 145kΩ (including the cable) |
| Earpad Material | Synthetic leather |
| Driver Unit | Electrostatic |
