Do you have a question about the stayer PRP6 and is the answer not in the manual?
Instructions for installing and removing the trimmer bit using the provided wrench and spindle lock.
Details on how to adjust the cutting depth using the knurled knob and fix the position with the round edge nut.
Guidance on how to operate the on/off switch, ensuring the tool is switched off before plugging in.
Steps for proper tool operation, including setting the base, achieving full speed, and moving over the workpiece.
Contact details for Stayer Ibérica S.A., including address, sales, and general information email addresses.
Information for EC countries on proper disposal and recycling of the machine, accessories, and packaging.
Declaration certifying the machine type (TRIMMER ROUTER) and model (PRP6) conforms to relevant directives.