8
Unpacking and identifying parts
Remove the parts one at a time from the box. Make a check in the space provided as you identify each
part. Any part that is packed in an envelope should be identied and then kept in that envelope until
it’s called for. Do not throw away any packing material until all parts are accounted for. If anything is
missing, please contact Tiffen for a replacement.
You should have:
Steadicam Merlin
2®
DVD: “The Art of Steadicam Merlin 2”
Nine threaded stainless-steel weights:
One Start and two Finish weights
Six Mid weights
Plastic Bag, containing:
Mounting Screw for mounting camcorder to Merlin 2
Locating Pin sets: pin and attaching screw
Lens Saddle (provides optional stiffening and support for
some heavy camcorders)
Tripod Adaptor Plate
The Parts
When all parts have been located and identied, watch
Section 3 of the DVD, Unfolding the Merlin
2®
.
Then continue with the Manual.
To Next Page
