Need help?Do you have a question about the Stealth Cam STC-G42NG-KPT and is the answer not in the manual?
General| Type | Trail Camera |
|---|---|
| Megapixels | 12 MP |
| Video Resolution | 1080p |
| Detection Range | 100 ft |
| Trigger Speed | 0.5 seconds |
| IR Range | 100 ft |
| Battery Type | AA |
| Battery Quantity | 8 |
| Memory Card Type | SD |
| Weight | 1.5 lbs |
| Image Sensor | CMOS |
| Flash Type | No Glow IR |
Explains the three pre-programmed settings for quick camera configuration and operation.
Guides users through personalizing camera parameters for specific shooting scenarios.
Details how to set the camera's date, time, and geographical time zone for accurate logging.
Covers setting the time display format and choosing the camera's operating mode (PIR, Time Lapse).
Explains settings specific to the PIR Photo mode, including resolution, delay, range, and burst.
Details settings for PIR Video mode, such as resolution, length, audio, and PIR range.
Describes configuration options for Time Lapse mode, including photo resolution, delay, and start/stop times.
Covers camera naming, temperature display, info bar, and DVR loop recording settings.
Explains GPS geo-tagging, factory resets, and setting up a security key for the camera.
To Next Page
