Need help?Do you have a question about the Stealth Cam STC-I530IR and is the answer not in the manual?
General| Megapixels | 5 MP |
|---|---|
| Trigger Speed | 0.5 seconds |
| Batteries Required | 8 AA batteries |
| Battery Type | AA |
| Memory Card Slot | Yes |
| Storage | SD card (up to 32GB) |
| Type | Infrared |
| Video Resolution | 1280x720 HD |
| Battery Life | Up to 1 Year |
Details the one-year limited warranty coverage, exclusions, and requirements for service.
Details on installing 6 x "C" cell alkaline batteries with correct polarity.
Instructions for connecting a 12V lead acid battery for extended field life.
Information on the camera's built-in memory and expandable SD card slot.
Procedure for inserting and removing SD memory cards into the camera slot.
Details on how to control the IR Emitter mode using the camera's buttons and LCD.
Guide to setting the image resolution (HIGH/LOW/BASE) on the camera.
Instructions for programming the capturing sequence (number of pictures per triggering).
How to program the video recording length (5-90 seconds) for each triggering event.
Procedure for setting the camera's idle time out period in minutes.
Instructions for setting the camera's date and time using the 24-hour military format.
Basic recommendations for mounting and positioning the camera for optimal field use.
Step-by-step guide for mounting the camera using the optional tree screw accessory.
Instructions for securing the camera using the provided mounting strap.
Guide to verifying camera placement and detection range using the test mode.
Methods for exiting the camera's test mode and entering PIR detection.
Steps to connect the camera to a TV for viewing captured images and video clips.
Guide to configuring the TV output signal (NTSC or PAL) for optimal viewing.
Navigating and viewing thumbnail previews of captured images and video clips on a monitor.
Playing back recorded AVI video clips on external monitors.
Instructions for transferring images from the camera to a computer using a USB connection.
Connecting the camera to a computer to view captured images through USB.
Methods for deleting captured images one by one or all at once.
Procedure for deleting individual images from the camera's memory.
Process for erasing all captured images from the camera's memory.
Guide to formatting the camera's memory, which erases all images.
Details on PC system requirements and software compatibility for using the camera.
Recommended environmental conditions for storing the camera when not in use.
Important guidelines for maintaining and caring for the camera to prevent damage.
Information regarding the camera's compliance with FCC rules and potential interference.
To Next Page
