www.stealthcam.com! Page!!
877126918490!
!
13!
CAMERA'SETUP'(cont.)'
! Reduce'Blur'(Default'–'Advanced)
o PROGRESSIVE – This setting will use a maximum exposure time of 1/125sec for the night
photos. Other adjustments are made to increase the brightness and clarity of the
photo.
o ADVANCED!–!This!setting!will!use!a!maximum!exposure!time!of!1/40sec!for!the!night photos.!
o STANDARD!–!This!setting!will!use!a!maximum!exposure!time!of!1/15sec!for!the!night photos.!
! Photo'Burst'(Default'–'1'Photo)
o Capturing!options!will!be!1!to!9!images!with!a!1.0!sec!delay.
o The!options!are!1!Photo,!2!Photos,!3!Photos,!4!Photos,!5!Photos,!6!Photos,!7!Photos,!8!
Photos,!and!9!Photos.!
! Burst Interval (Default – 1 second)
o This setting allows the camera to set the time between each capture within a single triggered
event.
o The options are 1 second, 2 seconds, 3 seconds, 4 seconds, and 5 seconds. (Note while in
30MP the interval can be 2-5 seconds)
! IR Brightness Control (Default - Full)
o Full - This enables the maximum power of the LEDs to have the brightest illumination
during night captures
o Half - Reduces the power of the LEDs to reduce the frequency and effects of overexposing the
object.
! Smart Illumination Technology (Default - OFF)
o While enabled the camera will actively monitor the light level and and activate LED
illumination for a color image in the twilight hours.
To Next Page
Loading...
Need help?
General
