www.stealthcam.com! Page!!
877126918490!
!
12!
CAMERA'SETU4'(cont.)'
! Operating Hours';DefaXZ?'M'24/7A&'%6;1!1/UU;=\!U/..1!U6/!V0:/80!360U!1</V;9;V!62781!U2
2</80U/!m1V6/Q7./Qn!28!U2!m0.30X1n!Z/!2=>!
o 24/7
o $V6/Q7./Q
! $U08U!NW/907.U - F5@FF+*O
o %;:/!80=\/1!982:!FF@FF!U2!CJ@IE!iff@**j
! c=Q!NW/907.U - FI@FF-*O
o %;:/!80=\/1!982:!FF@FF!U2!CJ@IE!iff@**j
NOTE:!+VU;T;UX!$U08UMc=Q!1/UU;=\1!08/!T;1;Z./!2=.X!;9!$V6/Q7./Q!;1!1/./VU/Q!
! Photo'Resolution'(Default'–'8.0'MP):!This!setting!determines!the!quality!of!the!photo.
o 30.0!MP!
o 16.0!MP!
o 8.0!MP!
o 4.0!MP!
! PIR'Delay'(Default'–'5'sec):'The!camera!will!wait!a!specified!amount!of!time!between!PIR!
photos.'
o The!PIR!Delay!range!is!from!5!seconds!to!59!minutes!and!59!seconds.!
o The!5-second!option!will!remove!the!PIR!Photo!Delay.!The!camera!will!take!a!photo(s) ,
save! the! photo(s) ! and! then! become! ready! to! take! another! photo(s) !with!no!delay.!
o The!5-second!option!will!allow!the!camera!to!stay!awake!for!2sec!after!the!previous
photo!was!taken.!!This!will!allow!for!the!camera!to!quickly!take!another!photo!without
taking!extra!time!for!the!camera!to!fall!asleep!and!then!wake!up!again.
! PIR Range (Default - Standard): Camera will adjust PIR sensitivity
o Extended - Increased sensitivity to reach the further detection range. With increased
detection runs the risk of the PIR more easily triggered on undesired objects.
o Standard - Balance between detection range and sensitivity.
o Near Field - Decreased sensitivity and detection range ideal for shallow fields.
To Next Page
Loading...
Need help?
General
