Need help?Do you have a question about the Stealth Cam STC-XV4WF and is the answer not in the manual?
General| Battery Type | 8 AA batteries |
|---|---|
| Wireless Connectivity | Wi-Fi |
| Storage | SD Card (up to 32GB) |
| Detection Range | 100 ft |
| Flash Type | Infrared |
Describes the OFF, ON, and TEST positions of the camera's main switch.
Details the functions of the MENU, ENTER, and Directional buttons for navigation and operation.
Explains the display icons shown in Quick Set modes, including scrolling text.
Describes icons for Photo/Video Count, PIR/Time Lapse Delay, Battery Life, and Countdown Delay.
Details the pre-programmed settings for QSET 1, QSET 2, and QSET 3 operational modes.
Introduces user-defined settings that will be explained on subsequent pages.
Instructions for setting the current date and time on the camera.
Options for selecting the correct time zone and time display format.
Allows selection between PIR Photo, Time Lapse, and PIR Video modes.
Details settings for PIR Photo mode, including resolution, delay, and naming conventions.
Configuration for Time Lapse mode, including delay, start/stop times, and PIR sensor behavior.
Settings for PIR Video mode, such as resolution, length, audio, and naming conventions.
Setting operational hours and selecting image quality from 4.0 MP to 30.0 MP.
Configures the time interval between PIR photos and adjusts PIR sensor sensitivity.
Settings to improve photo clarity and configure capturing multiple photos with a delay.
Sets time interval between captures and adjusts LED illumination power.
Enables active light monitoring and LED illumination for twilight color images.
Sets the delay between photos and the start time for Time Lapse sessions.
Defines the stop time for Time Lapse photo sessions.
Options for setting video resolution and recording duration from 10 to 180 seconds.
Enables or disables audio recording during video capture.
Imprints temperature on photos and controls information bar content on images.
Sets a name imprinted on photos and enables password protection for settings.
Illustrates icons representing different phases of the moon.
Manually sets coordinates and resets all camera settings to defaults.
Clears SD card contents and selects the operating language for the camera interface.
Instructions for upgrading camera firmware via SD card or USB port.
Guides through binding the camera using FIELD mode via Bluetooth and the APP.
Guides through binding the camera using LOCAL NETWORK mode via Wi-Fi router and the APP.
Enables binding of modes and displays the current wireless mode (FIELD/LOCAL NETWORK).
Shows current APP Account User Name and connected router SSID for local network.
Configures photo/video resolution and data upload frequency to the App.
Sets upload time, date/time sync, and daily test photo features.
To Next Page