Need help?Do you have a question about the Stealth Cam STC-BT16 and is the answer not in the manual?
General| Megapixels | 16MP |
|---|---|
| Trigger Speed | 0.5 seconds |
| Battery Type | 8 AA batteries |
| Storage | SD card up to 32GB |
| Recovery Time | 1 second |
| Detection Range | 80 feet |
| Flash Type | IR |
| Battery Life | Up to 12 months |
Install 8 AA batteries and a class 10 SD card into the camera.
Mount the camera at the desired location using the strap mount or other mounting mechanism.
Set camera to desired Quick Set (QSET) or custom configuration and place it.
Slide the battery release switch to the left, insert batteries matching orientation, then secure the switch.
Insert SD card into the slot with the label facing the back of the camera until it clicks.
Camera offers pre-programmed Quick Set modes (QSET 1, 2, 3) for quick setup and operation.
Allows detailed customization of all camera settings to fit your exact needs.
Specifies the functional temperature and humidity range for the camera.
To Next Page