"""#$%&'(%)*'+#*,+! -'.&!!!
/0012341/546!
*0!$60',6";60!!12;'+'*5()"!'E*"2)!
VIDEO LENGTH – (15 SEC default) : This setting is used to determine the length of time, in seconds,
of the video recording. This setting can be set to 5 - 30 seconds in 5 second increments. With this option
blinking, use the UP or DOWN arrow key to make your selection. Press the ENTER button to accept all your
changes and to go back to main options menu.
AUDIO – (ON default): This setting is used to turn the microphone ON or OFF when capturing a video.
TL DLY – (5 SEC default) : This setting is used to determine the length of time that the camera will wait between
Time Lapse Photo Intervals. With this option blinking, use of the UP and DOWN arrows to choice how many seconds
you want the delay to be set for --- 120S / 60S / 30S / 15S / 10S / 5S. Once this setting is on the appropriate time,
press the ENTER button to accept all your changes and to go back to main options menu. Note: Only available
while in TL mode.
TL STRT – (6:00 PM default) : This setting is used to set when the Time Lapse mode begins taking photos.
Time Lapse Photos will not be taken before this time.
TL STOP – (8:00 AM default) : This setting is used to set when the Time Lapse mode ends taking photos. Time Lapse
Photos will not be taken after this time.
N0*)"6S' 6$($)' U' E2"!R>VLKFAH&!This!setting!is!used!to!reset!the!camera!to!its!factory!defaults.!! With! this!
option! blinking,! pressing! the! 5,!or! #"82!arrow! buttons! will! switch!between! the! two! options!of!NO!or!YES.!!
When!the!YES!option!is!chosen!and!the!$2)$6!button!is!press!the!camera!will!default!all!configurations!made!up!
to!this!point.!Once!reset!is!completed!the!screen!will!flash!DONE!and!return!to!the!main!options!menu.!
#$%$)$'(#'*06#'U'E2"!R>VLKFAH&!This!setting!is!used!to!format!the!SD!memory!card!installed.!This!will! also!
delete! ALL! FILES! from! the! card.! This! is! always! recommended! to! do! when! a! brand! new! card! is! being!
used.! ! With! this! option! blinking,! use! the! 5,! or! #"82! arrow! key! to! move! between! the!
options!either!YES!or!NO.!!When!YES!is!chosen!you!will!see!the!screen!say!dEL, then DONE.
Once completed the screen will return back to the main options menu.
To Next Page
Loading...
Need help?
General
