Operations
•Assemble
1. Take out the Handle,Main Body, Li-ion Battery Pack, Clean Water Tank, Dirty Water Tank
Set, Roller Brush, Charging Station, Drying Tray, Cleaning Tool from the package.
2. Insert the handle into main body
of cleaner until you hear a click.
3. Turn over the clean water tank, insert it into the main body along with the clean water
tank slot until you hear a click.
4. Press the release button of Li-ion battery pack, then put the battery pack into the battery
slot, and push it up slightly until you hear a click.
5. Align the bottom of dirty water tank with the inlet, then push it inwards until you hear
a click.
www.altonindustries.com 08
To Next Page
Loading...