STEAMAX EVOD PRO
-
V2
–
USING THE DEVICE
Changing the atomizer head
1. Remove the top cap from the clearomizer tank.
2. Remove the old atomizer head which is located in a
base under the cap and insert an new one.
3. Finally, connect the top cap with the clearomizer tank
and ensure that the clearomizer is rmly closed.
Please note the following:
Prior to rst use, drip a few drops of your liquid on the atomizer
coil and let it sit before vaping. Please take several puffs without
activating the atomizer and leave the atomizer sit for 15 minutes
in the e-liquid lled tank before use. Don’t clean atomizer heads
with water. Because atomizer coils are wearing parts, they must be
changed regularly.
To Next Page
Loading...
