Steamfast SF-540 - Page 5

ENGLISH
|
5
•
The Steam Nozzle (1) emits the ow of hot, penetrating steam produced by the Boiler. The Fabric
Brush connects to the Steam Nozzle.
•
The Pole Top (2) connects to the top section of the Telescopic Pole. The Pole Top is comprised of
the Steam Nozzle Cradle and Hanger Hook.
•
The Hanger Hook (2
a) supports the included Hanger. The Hanger Hook can alternatively support
garments hung from any clean rust-free hanger.
•
The Steam Nozzle Cradle (2b) provides a safe and convenient place to hang the Steam Nozzle
when not in use.
•
The Handle (3) is engineered to stay cool while providing maximum grip and comfort.
•
The Telescopic Pole (4) connects to the main unit at the Pole Base. The Telescopic Pole is divided
into four sections, three of which can be extended and lowered to a variety of heights for optimal
user comfort and convenient storage.
•
The Pole Base (4a) is the receptacle into which the Telescopic Pole is inserted and secured to the
top of the main unit.
•
The Hose (5) directs steam ow from the main unit to the Steam Nozzle.
•
The Water Tank (6) is the container that holds water to be transferred into the Water Reservoir.
The Water Tank is removable for convenient lling, up to a maximum capacity of 78 oz (2,307 ml).
•
The Valve Cap (6a) regulates the ow of water between the Water Tank and the Water Reservoir,
and must be removed in order to ll the Water Tank with water.
•
The Water Reservoir (7) holds water before it is transferred to the internal heater and
convertedintosteam.
•
The Lighted On/Off Switch (8) powers the unit on and off. When set to the “ON” position, it
illuminates to provide a clear visual indication that the unit is receiving power.
•
The Drain Plug (9) is opened to easily empty the Water Reservoir of any remaining water.
•
The Fabric Brush (10) connects to the Steam Nozzle and is designed to brush away particles such
as lint, hairs and loose threads.
•
The Crease Tool (11) connects to the Steam Nozzle and is designed to create crisp creases by
gently “pinching” fabric against the Steam Nozzle.
•
The Hanger (12) connects to the Pole Top via the Hanger Hook, and is designed to support
garments for easy, accessible steaming. The Hanger quickly collapses for convenient storage.
•
The Garment Clip (13) fastens to the Telescopic Pole, and is designed to grip the bottom of a
garment that is hung from the Hanger. This will pull the garment taut, making it easier to steam out
wrinkles and create crisp creases.