Steamfast SF-920 - TROUBLESHOOTING COMMON ISSUES; UNIT FAILS TO POWER ON; INDICATOR LIGHT REMAINS RED; UNIT IS NOT EMITTING STEAM

ENGLISH
|
9
Unit Fails to Power On
Indicator Light remains Red
Unit is not Emitting Steam
Condensation forms around
humidifier or on windows
Unit is not plugged in.
Water level in Tank is empty
or too low.
Mineral build-up on
Heating Element.
Household circuit breaker /
ground fault interrupter has
tripped or blown a fuse.
Unit is damaged or otherwise
in need of repair.
Automatic shut off has
not reset.
Water level in Tank is empty
or too low.
Steam intensity is set too
high for room size or
pre-existing humidity level.
Plug power cord into
electrical outlet.
See CLEANING for
instructions on how to
remove mineral build-up.
Reset circuit breaker / ground
fault interrupter, or replace
fuse. For assistance, contact a
licensed electrician.
Immediately cease usage and
unplug. Contact Consumer
Service for assistance.
Turn unit off for 5 minutes to
allow Automatic shut off to
reset itself.
Decrease steam output to
low setting and/or open door
to room.
Refill with clean, cool tap
water. See FILLING WATER
TANK for instructions.
PROBLEM POSSIBLE CAUSE SOLUTION
Refill with clean, cool tap water.
See FILLING WATER TANK
for instructions.
Troubleshooting