7
Locking the pole:
1. Adjust the pole to its maximum height by sliding it upwards
then locking the 3 clips. (fig.9)
2. Slide the hanger on to the pole and tighten the hanger base
by turning in a counter clockwise direction. (fig.10)
3. Place the head support/hook on top of the pole and push
down to secure. (fig.10)
fig.9
fig.10
fig.5
fig.6
fig.8
fig.7
Before Use
Garment steamer assembly
fig.4
fig.3
Pole assembly:
1. Place the base on the floor and remove the
water tank. (fig.5)
2. Unscrew and remove the fastening lock from
the base of the steamer. (fig.6)
3. Insert the pole into the fastening lock, place
the pole into the base and turn in a clockwise
direction until the pole is securely in place.
(fig.7)
4.
Tighten the pole’s fastening lock by turning in
a clockwise direction until the fastener is
securely in place. (fig.8)
Preparation:
1. Insert the pole into the opening of the trouser
stretcher. (fig.3).
2. Attach the upper pant clamp to the folding
hanger and set aside. (fig.4)
To Next Page
Loading...