EasyManua.ls Logo

Steba JM 4 FERMENT - Page 14

Steba JM 4 FERMENT
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
If a GS-tested 16 A multi-pin extension is used, it may not be
charged with more than 3680 watts due to fire hazard.
Make sure that children do not tease the cable or that a trip
hazard occurs.
The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
Hygiene: Please always clean the device to avoid bacteria and
mold formation.
Cleaning
Attention! Pull the plug before cleaning and allow
the device to cool down.
Never immerse the unit into water.
Wipe the housing with a damp cloth with a little washing-up
liquid and let it dry.
Wash the glass containers and the accessories in hot water and
let them dry, or clean them in the dishwasher.
Do not use abrasive or acidic cleaning agents or steel sponges.
Workplace
Important:
Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a
even, stable and a heat resisting surface. It is important that no
inflammable items are
near to the device. Do not place the device on the edge of the
table so that it cannot be touched by children or fall down when
touched.

Related product manuals