What to do if Steba VDM 2 HOT & COLD food spills over?
If food spills over in your Steba Kitchen Appliance, it is likely because the food exceeds the maximum marking. To resolve this, avoid overfilling the appliance.
What to do if Steba VDM 2 HOT & COLD Kitchen Appliances display is on, but device does not work?
If the display is on but your Steba Kitchen Appliance isn't working, it could be due to the lid not being placed correctly or because no program has been selected. Ensure the lid is correctly placed and select a program to start the device.
Why Steba Kitchen Appliances OLED-Display does not work?
If the OLED display on your Steba Kitchen Appliance isn't working, several factors could be responsible. First, ensure the device is properly plugged in and check the fuse. Second, verify that the jug is in the correct position. If not, place the jug correctly.
What to do if Steba VDM 2 HOT & COLD Kitchen Appliances food is not well cooked?
If food is not well cooked in your Steba Kitchen Appliance, it might be due to too many ingredients. Try using less food. Also, the security switch may have triggered, in which case you should contact service.
What does error code E2 mean on Steba Kitchen Appliances?
Error code E2 on your Steba Kitchen Appliance indicates that the jug is not in the correct position. Make sure to place the jug correctly.
Warning about the sharpness of the appliance's blade.
Guidelines for child usage and supervision.
Critical warning against immersing the appliance in water.
Procedure for cleaning the appliance before its first use.
Explanation of the safety feature that switches off the appliance when the lid is open.
Warning that the jug surface becomes hot and steam escapes from the lid.
Warning against pouring cold water into a hot glass jug to prevent breakage.
Essential safety step to disconnect power before commencing cleaning.
Warning about the sharp blade during the cleaning process.
Guidelines for selecting a safe and suitable location for operating the appliance.
Warning against operating the appliance without contents to prevent overheating.
Ensuring the lid is correctly placed for the appliance to start and operate safely.
Important note on how cooking time is measured for hot dishes.
Guide to using the time preselection function for starting programmes later.
Overview of available programmes, their duration, temperature, and mode.
Troubleshooting for display non-functionality and device operation problems.
Advice for preventing food spillage and ensuring proper food cooking.
Guidance for resolving specific error codes E1, E2, E3, and E4.
Recipe instructions for making soy milk using the appliance.
Recipe instructions for making tofu, including curdling and pressing.
Description of silken tofu preparation and its uses.
Recipe for preparing baby food pastes using vegetables, meat, or fruit.
Instructions for preparing grain and cereal drinks.
Basic recipe for preparing soup and Asian rice porridge.
Instructions for preparing corn-based drinks or dishes.
Usage of the Mix/Clean programme for mixing ingredients or cleaning the appliance.
General instructions for making smoothies with the appliance.
Recipes for green, summer, and tomato-pepper smoothies.
Information on the proper disposal of the product and packaging materials.
Contact information and procedures for product service and repair.
List of conditions and circumstances not covered by the product warranty.
General| Brand | Steba |
|---|---|
| Model | VDM 2 HOT & COLD |
| Category | Kitchen Appliances |
| Language | English |
To Next Page
