EasyManua.ls Logo

Steba MX 600 Smart - Getting Started

Steba MX 600 Smart
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Getting started
Never let the device run empty, the motor may overheat.
Only fill the appliance with solid food up to 1250ml and add some liquid. Liquid
food can be mixed up to 1750ml.
Place the glass jar with its 2 grooves on the motor part.
Put the lid on top and engage with rotary motion to the handle.
Only open the refill opening in the lid during mixing if liquids or spices are to be
able.
The maximum mixing time should not exceed 2 minutes, then let the device cool
down for 1 minute.
If the overtemperature protection of the motor triggers, pull the plug and allow
the device to cool down.
Mixing
Plug in the device, the power button flashes. If the button is pressed, the LED lights
up.
If the SMART Control button is pressed, the LED flashes.
The automatic program runs with different speeds and mixing times. Depending
on the type and quantity of food (hard or soft), the device determines the opti-
mum consistency and turns off automatically once it is obtained.
After mixing, press the power button and pull the plug.
Note: empty the glass jar after mixing. Do not store food in it for a longer time and
carefully clean the jar.

Related product manuals