EasyManua.ls Logo

Steba SV 60 - Cleaning and Maintenance; Before Initial Use Cleaning; General Cleaning Procedures

Steba SV 60
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Before initial use: clean all parts carefully and leave to dry.
Attention! Housing gets hot. Danger of burns! Do
not place the appliance on a sensitive surface (e.g.
painted furniture) and keep a distance of at least 70cm
to burnable materials.
If an extension cable is used, it has to have a cross-section of
1,5mm². A cable drum must always be unwound.
If a GS-tested 16 A multi-pin extension is used, it may not be
charged with more than 3680 watts due to fire hazard.
Make sure that children do not tease the cable or that a trip
hazard occurs.
The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
Hygiene: Please always clean the device to avoid bacteria and
mold formation. Excessive dirt can damage the device and im-
pair its function.
After unplugging, the heating element will remain hot and
should not be touched or placed on combustible surfaces.
Cleaning
Attention! Pull the plug before cleaning and allow
the device to cool down.
Never immerse the unit into water.
The device can be cleaned with warm water with normal com-
mercial washing up liquid.
Hygiene: in any case you need to clean the device if vacuum
bags became leaky during the cooking and food floats directly
into the water.

Related product manuals