12
to burnable materials.
∙ Handle the glass lid carefully. Do not use if a crack is visible.
∙ If an extension cable is used, it has to have a cross-section of
1,5mm². A cable drum must always be unwound.
∙ If a GS-tested 16 A multi-pin extension is used, it may not be
charged with more than 3680 watts due to fire hazard.
∙ Make sure that children do not tease the cable or that a trip
hazard occurs.
∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
∙ Hygiene: Please always clean the device to avoid bacteria and
mold formation.
Cleaning
∙ Attention! Pull the plug before cleaning and allow
the device to cool down.
∙ Never immerse the unit into water.
∙ Pull the controller out of the grill plate.
∙ Clean the grill plate and the reflector plate with a rinsing brush
and detergent (if heavily soiled, soak in soapy water before-
hand.)
∙ The glass cover can be removed from the device for cleaning by
pulling it vertically upwards.
∙ Wipe the housing with a damp cloth and a little washing-up
liquid.
∙ Never immerse the controller housing with the supply line in
water!
∙ The device can be placed vertically for storage.
Workplace
Important:
Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a
To Next Page
Loading...
