EasyManua.ls Logo

Steba VG 50 - Cleaning and Maintainance; Working Place

Steba VG 50
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Cleaning and maintainance:
The device should be cleaned after each use
Unplug the device
The device should cool down a little. It can be cleaned easier
when it is not that hot.
Never immerse the device in water!
Use a humid cloth with a little bit of detergent to clean it. Re-
sisting dirt should be covered with some oil, wait for ca 5 min
and try to remove it again with a humid cloth. Do not use abhe-
rasive cleaners. When cleaning the oil tray, be careful, that the
liquid in it is cooled down completely.
Working place:
Important:
Never place this device on or next to hot surfaces (e.g. hot stoves). Only use it on a
even, stable and a heat resisting surface. It is important that no inflamable items are
near to the device.
Safety requirements during usage:
Only use the appliance at a safety plug socket. This should be connected to a earth
leakage circuit breaker
Use the appliance only when it is assembled.
While setting up the device, please note that the logo should always be in front of
you and the thermostat needs to be plugged in on the right.
Do not use the grill plate outside of the appliance. The heating plate must always
be placed on the base while using. Only use the appropriate thermostat controller.
Never leave the appliance outdoors after usage.
Fat and other grill food can spatter and drop. Therefore do not place the appliance
not directly on sensitive surfaces, e.g. Polished table tops, parquet or carpet.
When using the appliance with stand, be sure that the stand is standing stable,
because the danger of burns when it falls
Be sure that the cable is placed that way that it cannot be pulled or touched during
usage.
Always unplug the appliance and cool it down before the device is carried away.
Never carry it when it is hot.
Unplug the appliance after each usage or before cleaning.
Always place the oil tray bellow the grill plate.