33
∙ The appliance should be supplied through a residual current
device (RCD) having a rated residual operating current not ex-
ceeding 30mA.
Working place:
Important: Never place this device on or next to hot surfaces
(e.g. hot stoves). Only use it on a even, stable and a heat resisting
surface. It is important that no inflamable items are near to the
device.
Safety requirements during usage:
∙ Only use the appliance at a safety plug socket. This should be
connected to a earth leakage circuit breaker
∙ Use the appliance only when it is assembled.
∙ Never leave the appliance outdoors after usage.
∙ Fat and other grill food can spatter and drop. Therefore do not
place the appliance not directly on sensitive surfaces, e.g. Polis-
hed table tops, parquet or carpet.
∙ When using the appliance with stand, be sure that the stand is
standing stable, because the danger of burns when it falls
∙ Be sure that the cable is placed that way that it cannot be pul-
led or touched during usage.
∙ Always unplug the appliance and cool it down before the de-
vice is carried away. Never carry it when it is hot.
∙ Unplug the appliance after each usage or before cleaning.
∙ Always place the oil tray bellow the grill plate.
∙ The device must not be operated with charcoal or
flammable liquids.
Cleaning
∙ Unplug the device
∙ Set the on/off switch to “0”
∙ Let the device cool down
To Next Page
Loading...
