Need help?Do you have a question about the Steca PR 2020 IP65 and is the answer not in the manual?
General| Input Voltage | 12V / 24V |
|---|---|
| Max. Solar Current | 20A |
| Charge Current | 20A |
| Discharge Current | 20A |
| Protection Class | IP65 |
| Max. Solar Input Voltage | 47V |
| Max. Load Current | 20A |
| Max. PV Voltage | 47V |
| Temperature Compensation | -4mV/K per cell |
| Operating Temperature | +50°C |
Provides essential safety guidelines for handling the regulator and battery during installation and operation.
Specifies suitable locations and environmental conditions for mounting the regulator.
Details the correct sequence for connecting solar modules, battery, and loads to the regulator.
Details the various symbols and information shown on the regulator's display for system status.
Explains how the regulator calculates the State of Charge (SOC) for battery management.
Describes the regulator's function to prevent excessive battery discharge.
To Next Page