EasyManua.ls Logo

Steel Core 33186 User Manual

Steel Core 33186
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
For Customer Service, Call 1-800-348-5004
or e-mail customerservice@focus-ontools.com
33186 12/2017
3.5 AMP ELECTRICAL JIG SAW TOOL
33186
*Actual product may vary slightly
Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this product.
Observe all safety information to protect yourself and others. Failure to observe the instructions may result in property
damage and/or personal injury. Please keep instructions for future reference.
For warranty purchases, please keep your dated proof of purchase. File or attach to the manual for safe keeping.
This product can expose you to chemicals including
LEAD/CADMIUM/DEHP, which is
known to the State
of California to cause cancer and birth defects or
other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
WARNING
Question and Answer IconNeed help?

Do you have a question about the Steel Core 33186 and is the answer not in the manual?

Steel Core 33186 Specifications

General IconGeneral
BrandSteel Core
Model33186
CategoryPower Tool
LanguageEnglish

Summary

GENERAL SAFETY RULES

PERSONAL SAFETY

Maintain Alertness and Common Sense

Stay alert, avoid fatigue, drugs, and alcohol for safe operation.

Proper Attire and Hair Restraint

Wear suitable clothing; contain long hair to prevent entanglement.

Prevent Accidental Starting

Ensure the switch is off before plugging in; remove tools.

TOOL USE AND CARE

SPECIFIC SAFETY RULES

Safe Gripping and Wire Avoidance

Hold by insulated surfaces; avoid contact with live wires.

Hearing Protection

Wear ear protectors for prolonged use to prevent hearing loss.

Cutting Material Preparation

Remove nails; check blade clearance; avoid cutting hollow pipe.

Operation Safety Precautions

Ensure blade runs before cutting; keep hands from moving parts.

Hot Surface Warning

Do not touch hot metal parts or blade immediately after use.