CABLE MANAGEMENT
When installing equipment, either on the worksurface or below, be sure that the
connecting cables are free from obstruction. Flex offers cable brackets and
a PET cable tray as option to help manage excess cables/wires on the underside
of the worksurface.
WORKSTATION DESIGN TIPS
• Ensure that power cords for all accessory items – computer, lights, monitors,
etc. – are of sufficient length to reach outlets throughout the range of
worksurface height adjustment. Do not subject the cords to any strain while
height adjustment is taking place.
• Always check for proper operating clearance before placing any item on,
above or below the worksurface.
MAINTENANCE AND CLEANING
Regularly clean dust and dirt from lifting columns. To ensure all surfaces are
thoroughly cleaned, make sure the lifting columns are fully extended to their
maximum height. Also, be sure to inspect cables and lifting columns for
damage. Check all connections for both correct function and secure mounting.
Caution:
A damp cloth is recommended. To protect the painted surfaces, use a
cleanser that is not highly alkaline or acidic. A pH-neutral product is ideal.
Note:
Please do not move the desk without help. Refer to the guidelines at the
end of the assembly instructions, or contact your facilities group for assistance.
TROUBLESHOOTING
If you are having trouble with your desk, try the simple steps outlined below.
If problems persist, please refer to the Steelcase Flex Collection Height-Adjustable
Desk troubleshooting guide.
POWER-SAVING CONTROL BOX:
• The control box automatically powers down into ‘standby’ mode after 10
seconds of inactivity.
• During standby mode, the control box only consumes 0.1 watt of power.
To Next Page
Loading...